Pneumatic Cylinder Tubing
CHROMED I.D.
STEEL AIR CYLINDER TUBING
|
O.D |
I.D |
O.D |
I.D |
|
1 1/4 |
1.000 - 1.003 |
4 3/8
|
4.000 - 4.003 |
|
1 3/8 |
1.125 - 1.128 |
4 3/4
|
4.500 - 4.503 |
|
1 3/4 |
1.500 - 1.503 |
5 1/4
|
5.000 - 5.005 |
|
1 7/8 |
1.500 - 1.503 |
6 1/4 |
6.000 - 6.006 |
|
2 1/4 |
2.000 - 2.003 |
6 3/8 |
6.000 - 6.006 |
|
2 3/8 |
2.000 - 2.003 |
6 1/2 |
6.000 -6.006
|
|
2 3/4 |
2.500 - 2.503 |
7.326 |
7.000 - 7.007 |
|
2.850 |
2.500 - 2.503 |
8.450 |
8.000 - 8.008 |
|
3 1/4 |
3.000 - 3.003 |
10.450 |
10.000 - 10.010 |
|
3.350 |
3.000 - 3.003 |
12.450 |
12.000-12.012 |
|
3 1/2 |
3.250 - 3.253 |
14.450 |
14.000 -14.014 |
|
3 3/4 |
3.500 - 3.503 |
16.450 |
16.000 - 16.016 |
|
3.849 |
3.500 - 3.503 |
18.850 |
18.000 - 18.018 |
|
4 1/4 |
4.000 - 4.003 |
20.850 |
20.000 -20.020 |
CLOSER TOLERANCES - A better fit for your
packings
BETTER SURFACE FINISH - Because the I.D. surface is honed before
chroming, it means all surface imperfections pits, scores,
laminations are eliminated thus providing improved seal life.
BETTER SIDE-LOADING CAPACITY - The chromed I.D surface as well
as the steel sub-surface provide excellent resistance to scoring
and wear-including severe conditions.
DENT AND TEMPERATURE RESISTANCE - The steel allows high
resistance to external damage and will operate in high
temperature ranges.
LOW COEFFICIENT OF FRICTION - Lower break-away and operating
pressures and longer seal life are benefits due to very low
coefficient of static and dynamic friction.
MATERIAL - is produced to ASTM A-519 Seamless C-1015 to 1026 and
ASTM A-513 in D.O.M. Stress Relieved Annealed.
Tensil - Minimum 70,000 P.S.I
Yield - Minimum 60,000 P.S.I
Steel Hardness - 87 R B min.
CHROME PLATING
Thickness. - 0.0003" à 0.0005" STANDARD
Hardness - 65 RC min.
Finish - 16 RMS max.
LENGTHS
8 to 12 ft. or cut to length
|
.gif){kind=small}
